Why should you Skim your Bentley Brake Discs?

The Pro-Cut process will return your brakes to Bentley ex-factory condition. The process matches the disc to the hub. In other words, if there is the slightest run-out in the hub (i.e. it doesn’t rotate in a perfectly true way), the Pro-Cut process will take care of this and correct it by automatically compensating for it.

Bentley Brake discs should be resurfaced when:

  • There is brake vibration or judder
  • Discs are corroded or rusty
  • Brake pads are changed but new discs are not necessary
  • Brakes feel spongy

How Does Bentley Brake Disc Skimming Work?

The lathe works on the vehicle, by attaching itself directly to the hub. The technology includes an automatic, electronically-controlled, gyroscope system which measures run-out in the hub and corrects for this to an accuracy of 0.025mm. That’s less than the thickness of a human hair.

The automatic surface machining of a disc is completed in around 15 minutes. The complete process takes less than 30 minutes per disc.

All Bentley brake discs can be skimmed at least once. The only time your brake discs should be replaced is when they reach minimum thickness. Leading manufacturers have approved the Pro-Cut process of brake disc skimming.

Bentley Brake disc skimming is a lower cost alternative to Bentley brake disc replacement.

The Supercar Rooms Bentley Brake Disc Skimming Service

Our Specialist Bentley Brake Disc Skimming Service can be used for the following Bentleys:

  • Bentley Arnage Green-Label
  • Bentley Arnage Red-Label
  • Bentley Arnage T & R
  • Bentley Continental GT / GTC
  • Bentley Flying Spur

Collection and delivery service available.

If you have any questions please do not hesitate to call our Service Department on 01299 250009 & speak to one of our Bentley Specialists. See the full range of Bentley Servicing Options available at The Supercar Rooms.